Suzuki UY125 Service Manual page 104

3-70 ENGINE
• Fit a new gasket 1 to the cam chain tension adjuster body 2.
#
Use a new gasket to prevent oil leakage.
• Install the cam chain tension adjuster body to the cylinder and
tighten the bolts to the specified torque.
" Cam chain tension adjuster mounting bolt:
• Turn the adjusting screw counterclockwise with a flat-bladed
screw driver to unlock.
• Install the rubber cap 3.
• After installing the cam chain tension adjuster, rotate the
crankshaft (some turns), and recheck the positions of the cam
shafts.
#
Be sure to check the valve clearance. (!2-6)
CYLINDER HEAD COVER
• Fit a new gasket 1 to the cylinder head cover.
• Apply sealant to cam end cap.
- 99104-31140: SUZUKI BOND "1207B"
#
Make sure to replace the gasket with a new one.
• Place the cylinder head cover on the cylinder head.
• Fit a new gasket 2 to each head cover bolt 3.
#
Use a new gasket to prevent oil leakage.
• Tighten the head cover bolts to the specified torque.
" Head cover bolt: Intial: 10 N·m (1.0 kgf-m)
Final: 14 N·m (1.4 kgf-m)
• Install the spark plug. (!2-7)
10 N·m (1.0 kgf-m)
http://mototh.com
"UP"