6-18
ELECTRICAL SYSTEM
BUSHING
Check the bushing for wear and damage.
If any defects are found, replace the housing end (outside).
STARTER MOTOR REASSEMBLY
Reassemble the starter motor in the reverse order of disassem-
bly. Pay attention to the following points:
• Apply SUZUKI SUPER GREASE "A" to the lip of the oil seal
and bearing.
. 99000-25010: SUZUKI SUPER GREASE "A"
• Apply a small quantity of SUZUKI MOLY PASTE to the arma-
ture shaft.
/ 99000-25140: SUZUKI MOLY PASTE
• Fit the depression of the starter motor case to the projection
of the terminating holder.
• Align the line on the starter motor case with the line on the
housing end (inside).
http://mototh.com