Suzuki UY125 Service Manual page 154

5-30 CHASSIS
• Install the piston/cup set.
• When installing the brake light switch, align the projection on
the switch with the hole in the master cylinder.
• Apply SUZUKI SUPER GREASE "A" to the piston and brake
lever pivot.
' 99000-25010: SUZUKI SUPER GREASE "A"
• When installing the master cylinder onto the handlebars, align
the master cylinder holder's mating surface A with the
punched mark B on the handlebars and tighten the upper
clamp bolt first.
# Master cylinder bolt: 10 N·m (1.0 kgf-m)
• Connect the front brake light switch lead wires.
Spring
http://mototh.com
Secondary cup
Piston
Snap ring
Primary cup
Plate
Master cylinder
Handlebar
Upper
clamp
bolt
"UP"
mark
Clearance
Boot