Installation - Suzuki UY125 Service Manual

HANDLEBAR RIGHT SIDE PARTS
• Remove the throttle cable by removing the throttle grip case
1.
• Remove the throttle grip 2.
• Disconnect the front brake cable 3 and brake switch 4.
(UY125)
• Remove the front brake lever holder 5. (UY125)
• Disconnect the brake light switch lead wires, and remove the
front brake master cylinder. (UY125S)("5-30)
• Remove the handlebars by removing the handlebar clamp
nut.

INSTALLATION

Install the handlebars in the reverse order of removal.
Pay attention to the following points:
• Tighten the handlebar clamp nut to the specified torque.
# Handlebar clamp nut: 60 N·m (6.0 kgf-m)
HANDLEBAR RIGHT SIDE PARTS
• Align the punch mark A on the handlebars with the front
brake holder matching surface. (UY125)
• Install the master cylinder. (UY125S)("5-33)
http://mototh.com
CHASSIS 5-39