Suzuki UY125 Service Manual page 87

• Remove the crankshaft oil seal with the special tool.
$ 09913-50121: Oil seal remover
#
Replace the removed oil seal with a new one.
• Remove the crankshaft bearing with the special tool.
$ 09913-70210: Bearing installer set (35 mm)
#
Replace the removed bearing with a new one.
BEARING/OIL SEAL INSTALLATION
• Install the driveshaft bearing 1 and idle shaft 2 bearing with
the special tool.
$ 09913-70210: Bearing installer set (32 mm)
• Install the rear axle shaft oil seal with the special tool.
$ 09913-70210: Bearing installer set (40 mm)
• Install the rear axle shaft bearing with the special tool.
$ 09913-70210: Bearing installer set (42 mm)
http://mototh.com
ENGINE 3-53