Suzuki UY125 Service Manual page 77

• Install the pins 3 at three places on the drive face hub.
• Apply as small amount of SUZUKI SUPER GREASE "A" to
the cam where the pins are placed.
* 99000-25010: SUZUKI SUPER GREASE "A"
• Install the new O-rings 4.
• Apply SUZUKI SUPER GREASE "A" to the O-rings.
• Install the movable driven face spring guide 5.
• Slowly turn the special tool handle to tighten and align the
flats A at the movable driven face end with clutch shoe plate
hole B.
$ 09922-31430: Clutch spring compressor
• Check that the special tool dogs are engaged with the clutch
shoe plate holes and screw the clutch shoe nut 6.
• Tighten the clutch shoe nut to the specified torque with the
special tool.
$ 09930-40113: Rotor holder
09930-40120: Rotor holder attachment (A)
" Clutch shoe nut: 60 N·m (6.0 kgf-m)
http://mototh.com
ENGINE 3-43