Suzuki UY125 Service Manual page 93

REDUCTION GEAR
• Install the driveshaft 1 to the case.
• Install the rear axle shaft 2.
• Install the idle driven gear 3 and washer 4.
#
Apply engine oil to each gear and shaft.
• Install the dowel pins 5 and new gasket 6.
• Install the reduction gear cover 7.
• Tighten the reduction gear cover bolts to the specified torque.
" Reduction gear cover bolt: 10 N·m (1.0 kgf-m)
http://mototh.com
ENGINE 3-59