• Remove the following parts.
H Main jet
I Pilot jet
J Needle jet holder
K Needle jet
%
Do not use a wire for cleaning of passage and jets.
• Remve the starter body L.
• Remove the pilot screw M, spring N, washer O and O-ring
P.
NOTE:
Before removing the pilot screw M, determine the setting by
slowly turning it clockwise and count the number of turns
required to lightly seat the screw. This counted number is impor-
tant when reassembling pilot screw to original position.
• Remove the throttle stop screw Q, washer R and spring S.
http://mototh.com
FUEL AND LUBRICATION SYSTEM
4-11