Replacement Of The Dust Filter On The Top Side; Pressure Verification Of The Liquid Cooling Circuit - Barco FLM HD14 User Manual

Image 15-4
7. Reinstall the side cover of the projector, see "Installation of the side cover", page 161.
C
AUTION

15.3 Replacement of the dust filter on the top side

Necessary parts
New HEPA dust filter for the top side (R9854480).
How to replace the HEPA dust filter on the top side of the projector ?
1. Remove the side cover of the projector, see "Removal of the side cover", page 158.
2. Remove the filter (F) on the bottom side by pulling out the filter holder (H) as illustrated.
Image 15-5
3. Place a new HEPA dust filter in the filter holder.
4. Reinstall the filter holder containing the new HEPA filter.
5. Reinstall the side cover of the projector, see "Installation of the side cover", page 161.
C
AUTION

15.4 Pressure verification of the liquid cooling circuit

How to check the pressure of the liquid cooling circuit inside the projector ?
1. Remove the side cover of the projector, see "Removal of the side cover", page 158.
2. Check the pressure indicated on the internal manometer of the liquid cooling circuit.
R59770017 FLM HD14 26/09/2006
A
:
Never install a used HEPA filter. Always install a new HEPA filter.
:
Never install a used HEPA filter. Always install a new HEPA filter.
15. Maintenance
A
F
H
147