Front Panel Terminology - Barco R9002328 Owner's Manual

All manuals and user guides at all-guides.com
VIDEO IN (Composite video, 1x BNC connector): allows a video tape
7
recorder, video camera, color receiver/monitor, etc. having video line
output to be connected to the projector.
S-VIDEO IN or second COMPONENT VIDEO IN: Separated Y/C (luma-
8
chroma) signal inputs and outputs for higher quality playback of Super
VHS signals (4-pin S-VIDEO connector). Second component video
in (luma pins.)

FRONT PANEL TERMINOLOGY

AUTODIAGNOSIS DISPLAY
1
LED indication for service purposes.
POWER (MAINS) SWITCH : press the switch to turn the projector ON.
2
Depending on the hardware set-up of the projector during installation,
the projector switches to ‘standby’ or to ‘operational mode’. If in
standby, the standby led in the autodiagnosis display lights up.
POWER (MAINS) INPUT: Connect the supplied ac power (mains) cord
3
here and to wall the outlet.
IR SENSOR
4
receiver for control signals transmitted from the RCU700.
R5975059A BARCOVISION 708 200498
   
2-3