Utr-1-1 Usb Handset; Usb Connection - NEC Univerge SV8100 System Hardware Manual

Issue 4.1
6.3
5 - 72

UTR-1-1 USB Handset

The NEC USB telephone can be plugged directly into a PC USB port, enabling
the high quality voice input and output capabilities of a standard desktop
telephone. By connecting it to the USB port of a computer, calls can
immediately be made and received using a SoftPhone without installation of
additional software drivers.
The physical design eliminates stress associated with holding the handset
between the ear and and shoulder. The user immediately hears a dial tone
upon taking the handset off-hook, eliminating the need to click on/off hook
icons in a PC application when making a call.
6.3.1 Handset Connection
Plug the handset cable (RJ-11 connector) into the bottom of the
cradle. Route the handset cable in the handset groove.
Figure 5-88 Installing the UTR-1-1 USB Handset Cable
6.3.2

USB Connection

Plug a USB cable (type A connector) into the back of the cradle. Plug
the USB cable (type B connector) into the USB port of a PC.
Figure 5-89 Installing the UTR-1-1 USB Handset to a PC
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
UNIVERGE SV8100