Installing The 8Lkd (Ld)-L Unit - NEC Univerge SV8100 System Hardware Manual

Issue 4.1
5 - 52
5.2.2.1

Installing the 8LKD (LD)-L UNIT

1.
2.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Figure 5-55 8LKD (LD)-L UNIT
To prevent possible damage to the 8LKD
(LD)-L UNIT or the DTL multiline
terminal during installation or removal,
disconnect the line cord/LAN cable and
the AC/DC adapter from the DTL
multiline terminal.
Turn multiline terminal upside down.
Only one 8LKD (LD)-L UNIT can be attached to the
.
DTL multiline terminal.
Pry the side panel from the multiline terminal.
Side Panel
Figure 5-56 Remove Side Panel from Multiline Terminal
UNIVERGE SV8100
Screw