NEC Univerge SV8100 System Hardware Manual page 116

Issue 4.1
3 - 48
4. Pull the cover toward you to remove.
Cover must be removed to install PZ-BS11 blade.
.
5. Align the PZ-BS11 blade with the guides located
within the expansion bay.
Figure 3-57 PZ-BS11 Blade Guides
6. Slide the PZ-BS11 blade into the chassis until
resistance (back plane) is felt.
Figure 3-58
7. Gently push until the blade seats and install the
supplied retaining screw.
UNIVERGE SV8100
Installing PZ-BS11 Blade in
Expansion Chassis
Installing the SV8100 Chassis