NEC Univerge SV8100 System Hardware Manual page 357

UNIVERGE SV8100
System Hardware Manual
1. Remove the screw from the front of the PGD(2)-U10 ADP.
Figure 6-2 Remove Cover from PGD(2)-U10 ADP
2. Using a screwdriver, break out the plastic piece covering the cable hole.
Figure 6-3 Remove Plastic Cover from Cable Hole
3. Set the S3 – S6 jumpers to the proper settings for the function to be used
(refer to Table 6-2 PGD(2)-U10 ADP S3 – S6 Jumper Settings on page
6-4).
Issue 4.1
6 - 3