Installing The Numbered Keypad On A Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Issue 4.1
5 - 36
4.7.1

Installing the Numbered Keypad on a Multiline Terminal

To prevent possible damage to the Numbered
Keypad or the DTL/ITL multiline terminal during
installation or removal, disconnect the line cord/
LAN cable and the AC/DC adapter from the DTL/
ITL multiline terminal.
1. Remove the plastic panels. (Refer to paragraph
Remove Plastic
Line Key
Panel
Numbered
Keypad
Panel
2. Pull down on the tab and lift the Numbered Keypad away from
the telephone to remove the existing button. See
Removing Numbered Keypad from DT300/DT700 Series
Terminal.
Figure 5-34
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Panels.)
Figure 5-33 Remove Plastic Panels
Removing Numbered Keypad from DT300/DT700
Series Terminal
UNIVERGE SV8100
Figure 5-33
Desi Printer
Sheet
Figure 5-34