Chsgw Small Batt Box To Chs2U Gw Connection - NEC Univerge SV8100 System Hardware Manual

Issue 4.1
3 - 74
7. Reattach the cover with the two screws previously removed.
3.3.2

CHSGW SMALL BATT BOX to CHS2U GW Connection

1. Power down the CHS2U GW chassis.
2. Disconnect AC power cable from rear of chassis.
3. From the back of the 9.5" chassis, remove the black plastic
square covering the two-prong battery terminal leads.
Figure 3-97 Reattaching the Top Cover Using Screws
Ensure the CHS2U GW chassis is powered
OFF.
Figure 3-98 9.5" Battery Terminal Cover
UNIVERGE SV8100
Installing the SV8100 Chassis