Using The Psa-L Adapter - NEC Univerge SV8100 System Hardware Manual

Issue 4.1
6 - 50
24. Connect the line cord to the adapter.
25. Connect the user system (KTS or PBX) cable.
26. If required, remove the side panel from the original cradle unit.
11.5.2

Using the PSA-L Adapter

CAUTION: Before installing or removing the
PSA-L adapter, remove the line cord, LAN cable,
and then AC adapter from the outlet.
1. Placing Calls:
When the PSTN line is activated either manually by the switch
or due to a power failure, use the dial pad buttons (0-9, *, #) to
place an outside call. Use the Vol
decrease audio levels.
Other than receiving calls, no other keyset functions are
available.
Figure 6-46 Install Plastic Panels
or
Installing SV8100 Optional Equipment
UNIVERGE SV8100
to increase or