NEC Univerge SV8100 System Hardware Manual page 347

UNIVERGE SV8100
System Hardware Manual
Figure 5-111 Removing the Connector Cover
5. Insert the lower claws of the Bottom Unit (see
Installing the BHA-L
terminal.
Figure 5-112 Installing the BHA-L UNIT
6. Align connector on inside of BHA-L UNIT and push down until
unit snaps into place.
7. Set tilt legs to desired position.
8. Return the multiline terminal to the numbered keypad in the up
position.
9. Connect the Line cord and the AC adapter.
UNIT) into precut holes on the multiline
Issue 4.1
Figure 5-112
5 - 89