Adding/Removing/Replacing Internal Usb Cable; Addition - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 2 Configuring and Upgrading the System
5.8

Adding/Removing/Replacing Internal USB cable

5.8.1 Addition

Add Internal USB cables as follows.
1. Shut down the OS.
→ The server will automatically be turned off.
2. Remove the power cord from the outlet.
3. Remove the CPU/IO module (see Chapter 2 (5.4.1 Removing CPU/IO module)).
4. Fix a cable clamp.
5. Hold tabs of the USB port cover inside the chassis to pull it out.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
180
Important See Chapter 2 (5.1.3 Preparing your system for upgrade) and Chapter 1(1.8
Anti-static Measures) in Safety Precautions and Regulatory Notices before starting
the job.
Important Fit the cable clamp on the carved seal.
Important Keep the removed cover carefully.
5. Installing Optional Devices