UNIVERGE SV8100
4.5
System Hardware Manual
Installing Line Key Kit (12LK-L KIT
The 12LK-L KIT Provides twelve additional buttons to ITL or DTL multiline
terminals. The 12LK-L KIT kit:
Mounts directly to top side of terminal
Supports Red and Green LED colors
4.5.1
Installing the 12LK-L KIT
To prevent possible damage to the 12LK-L KIT or
the DTL/ITL multiline terminal during installation
or removal, disconnect the line cord/LAN cable
and the AC/DC adapter from the DTL/ITL
multiline terminal.
1.
Turn multiline terminal upside down.
Only one 12LK-L KIT can be attached to the DTL/ITL multiline
.
terminal.
2.
Pry the right-side panel from the multiline terminal.
3.
From the lower left or right corner, pry the Line Key Panel from
the multiline terminal (refer to
Key Panel on page
)
Figure 5-22 12LK-L Kit
Figure 5-23 Removing the Line
5-28).
Issue 4.1
5 - 27