Power Requirements; Power Supply Specifications - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
5.2
System Hardware Manual
Connected Equipment
Music on Hold and Background Music Sources
External Amplifier
ITL Cabling

Power Requirements

A dedicated
100VAC/120VAC/220VAC/230-240VAC 50HZ/60HZ
within seven feet of the chassis is required. A separate dedicated outlet for
each chassis should be installed.
Double Pole/Neutral Fusing
(power supply fuses are located at both the L and N side).
5.2.1

Power Supply Specifications

AC240V Power Supply:
Dedicated 15 Amp circuit
Power Requirements: 230 VAC @ 15A Controlling/Base Chassis
Power Consumption: Base Chassis=263VA, Expansion
Chassis=263VA, total 1060VA
Input Voltage: 90VAC to 264VAC
(Rated Voltage: 100VAC/120VAC/220VAC/230-240VAC)
Frequency: 47Hz - 63Hz (Rated frequency: 50/60Hz)
Phase and Wire: Single Phase, 2 Line + PE Type
Grounding Requirements: No. 14 AWG copper wire
Feeding Voltage: D
With input voltage of 230 VAC and with full load conditions:
Base chassis can refer to either 9.5" or 19" chassis
.
Output Power: Base chassis=
520W
AC Input I: Base chassis=
Table 2-16 Cabling Requirements
term
/OPX/DID: -48V
SLT: 25mA / -28V
, Expansion chassis=
130W
, Expansion chassis=
1.15A
Issue 4.1
Cable
Hi-Fi Shielded Audio Cable
Hi-Fi Shielded Audio Cable
Cat 5 Straight Data Network
Cable – 328.1 ft (100m)
maximum distance.
circuit located
130W
, total
1.15A
, total
4.6A
2 - 19