NEC Univerge SV8100 System Hardware Manual page 320

Issue 4.1
5 - 62
7.
8.
9.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Carefully push the Serial cable into the Serial Cable
Groove (ITL, DT700 only).
Figure 5-70 Press Serial Cable into Groove
Using the guides, slide the DCL-60-1 onto the
installed bracket (refer to
Cable into Groove).
Secure the DCL-60-1 CONSOLE to the bracket with
the two screws provided.
Figure 5-71 Securing the DCL-60-1 CONSOLE
with Screws
UNIVERGE SV8100
Figure 5-70 Press Serial