Led Indications; Connectors - NEC Univerge SV8100 System Hardware Manual

Issue 4.1
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (100ms
On/Off)
4 - 96
5.7.3

LED Indications

LED indications for the CD-4ODTB are listed in
CD-4ODTB LED
function and LED and Operational status. Refer to
CD-4ODTB Blade on page 4-94
blade.
Table 4-52 CD-4ODTB LED Indications
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
5.7.4

Connectors

Table 4-53 CD-4ODTB RJ-61 Cable Connector Pin-Outs on page
4-97 shows the pin-outs for the RJ-61 connector. Refer to
4-32 CD-4ODTB Blade on page 4-94
location of the connectors on the ODT blade.
Indications. Each LED is listed with its associated
for the location of the LEDs on the
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
for an illustration showing the
UNIVERGE SV8100
Table 4-52
Figure 4-32
Remarks
Figure
Installing the SV8100 Blades