Led Indications; Setting Up Pgd(2)-U10 Adp Connections - NEC Univerge SV8100 System Hardware Manual

Issue 4.1
2.2
2.3
6 - 2
The PGD(2)-U10 ADP connects to any available digital extension port. The
terminal connections made within the PGD(2)-U10 ADP and the jumper
settings determine what features are used for each circuit.
Channel 1
Status LED

LED Indications

Table 6-1 PGD(2)-U10 ADP LED Indications
LED Indication
LED 1 Green LED when
CH1 in use.
LED 2 Green LED when
CH2 in use.

Setting up PGD(2)-U10 ADP Connections

If the PGD(2)-U10 ADP is to be wall mounted, all the cable connections
should be made first.
For the module to ID correctly after setting the jumpers, set the circuit type
to 0 for the module port in Program 10-03-01 prior to connecting the line
cord to the PGD(2)-U10 ADP.
Channel 2
Status LED
Figure 6-1 PGD(2)-U10 ADP
Flashing green LED indicates dipswitch setting
and programming for CH1 is conflicting.
Flashing green LED indicates dipswitch setting
and programming for CH2 is conflicting.
Installing SV8100 Optional Equipment
UNIVERGE SV8100
Note