Group Dialing - Develop FK-506 User Manual

3

Group dialing

If one-touch dial keys have already been programmed with a group of fax
numbers, the fax numbers of all destinations in the group can be specified
simply by pressing the corresponding one-touch dial key.
Note
For details on programming a one-touch dial key with a group of
recipients, refer to "Registering a group of fax numbers" on page 6-33.
1
Position the document to be faxed.
– Refer to "Positioning the document" on page 3-6.
2
If necessary, select the Quality setting.
– For details on selecting the Quality setting, refer to "Selecting the
fax quality" on page 3-10.
3
Press the one-touch dial key ([01]
through [32]) programmed with the
group of fax numbers where the fax
is to be sent.
– If a one-touch dial key was
incorrectly pressed, press the
[Clear/Stop] key to clear the
specified destination.
– When the switching plate is
closed in the lower position, the
keys are numbered 01 through 16.
– When the switching plate is open in the upper position, the keys are
numbered 17 through 32.
3-18
Faxing
FK-506