Table of Contents
Advertisement
2
Correcting text and input precautions
To delete an entered character
%
Press the [*] or [)] key to move the cursor (_) below the character to
be deleted, and then press the [Clear/Stop] key.
To add a character within text
%
Press the [*] or [)] key to move the cursor (_) below the character
where a character is to be added, and then type in the new character.
(The new character is inserted in front of the character at the cursor's
position.)
To enter text with the keypad
%
To enter a character with the same key used to enter the previously
entered character, press the [)] key before entering the next character.
(Refer to "Text input example" on page 2-14.)
To enter a space
%
Press the [123/ABC] key until input mode [A...] is selected, and then
press the [0] key in the keypad.
To stop entering text
%
Press the [Reset] key.
2-18
Precaution
FK-506
Advertisement
Table of Contents
