Develop FK-506 User Manual page 41

Precaution
No. Part name
22 [Fax] key/indicator
23 [Scan] key/indicator
24 [Copy] key/indicator
25 [123/ABC] key
26 [Reset] key
27 [Interrupt] key/indicator
28 [Clear/Stop] key
29 [Start] key/indicator
30 Keypad
FK-506
Description
Press to enter Fax mode. The indicator on the key
lights up in green to indicate that the machine is in Fax
mode.
Press to enter Scan mode. The indicator on the key
lights up in green to indicate that the machine is in
Scan mode. (Available only when network interface
card NC-503 or image controller IC-206 are installed)
Press to enter Copy mode. The indicator on the key
lights up in green to indicate that the machine is in
Copy mode.
Press to switch between number input mode and letter
input mode.
• Press to clear all settings (except programmed set-
tings) entered from the control panel.
• The currently specified job is canceled. (Pressing
this key does not switch the machine to Copy or Fax
mode.)
Press to enter Interrupt mode. The indicator on the key
lights up in green to indicate that the machine is in In-
terrupt mode.
Press the key again to cancel Interrupt mode and re-
turn to the mode before Interrupt mode was entered.
If this key is pressed while a received fax or computer
document is being printed, printing stops so that the
interrupting copy job can be performed. Press this key
again to continue printing the received fax or computer
document.
• Press to erase the entered letters and numbers.
• Press to stop a continuous copy operation.
• Press to stop the transmission/reception of the fax.
• Press to stop the print job from the computer.
• Press to start a copy operation.
• Press to start sending a fax.
• If this key is pressed while this machine is warming
up, the next copy job is queued.
• The key lights up in green to indicate that copy jobs
can be queued, and the key lights up in orange to
indicate that the machine is not ready to begin copy
operations.
• Use to type in the number of copies to be produced.
• Use to type in the various settings.
• Use to type in fax numbers.
• Use to type in speed dial numbers and text.
• In Fax mode, the [ ] key is used for tone transmis-
sions (pulse dialing), and the [#] key is used for ac-
cessing an outside line.
2
2-7