Initial Mode; Selecting The Buzzer Volume ("Buzzer Volume" Parameter) - Develop FK-506 User Manual

6

Selecting the buzzer volume ("BUZZER VOLUME" parameter)

1
Display the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 6-7.
2
Press the [+] or [,] key until "BUZZER VOLUME" is selected, and then
press the [OK] key.
3
Press the [+] or [,] key until "OFF", "LOW" or "HIGH" is selected, and
then press the [OK] key.
The "MACHINE SETTING" menu appears again.
6-8
UTILITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
MACHINE SETTING
BUZZER VOLUME

INITIAL MODE

SCAN THRESHOLD
BUZZER VOLUME
OFF
LOW
HIGH
Utility mode/Fax mode parameters
FK-506