Real-Time Transmission - Develop FK-506 User Manual

3

Real-time transmission

When the indicator on the [Memory TX] key is not lit, the real-time
transmission mode is selected.
With real-time transmission, each page of the document can be scanned
according to the transmission status. This ensures that even documents with
many pages can be sent.
!
Detail
Memory transmission is the default transmission mode. To select real-
time transmission as the default transmission mode, set "DEFAULT TX"
in Utility mode to "ADF TX". For details, refer to "Selecting the default
transmission mode ("DEFAULT TX" parameter)" on page 6-71.
When the real-time transmission mode is used, the document should be
loaded into the document feeder. Transmission is not possible by
positioning the document on the original glass.
If a real-time transmission job is specified while a fax is being sent or
received, the transmission is queued.
Real-time transmission cannot be used if multiple recipients are
specified.
The real-time transmission mode cannot be used together with the timer
transmission function.
3-46
Faxing
FK-506