Develop FK-506 User Manual page 231

Utility mode/Fax mode parameters
– When the switching plate is open in the upper position, the keys are
numbered 17 through 32.
4
Press the [+] or [,] key until "EDIT" or "DELETE" is selected, and then
press the [OK] key.
– If "EDIT" was selected, continue with the next step.
– If "DELETE" was selected, the registered program settings are
deleted and the "DIAL REGISTRATION" menu appears again.
5
Press the [+] or [,] key until "ADD" or "CHECK/EDIT" is selected, and
then press the [OK] key.
– If "ADD" was selected, specify the recipient.
– If "CHECK/EDIT" was selected, continue with the next step.
6
If necessary, change the recipient settings.
– Repeat steps 5 and 6 until all changes have been specified.
– To return to the screen where "ADD" or "CHECK/EDIT" can be
selected, press the [Back] key.
7
Select "RETURN", and then press the [OK] key.
The settings are registered, and the "DIAL REGISTRATION" menu
appears again.
FK-506
PROGRAM DIAL 32
EDIT
DELETE
RETURN
POLLING RX
ADD
CHECK/EDIT
RETURN
6
6-49