Utility mode/Fax mode parameters
Selecting the default scanning density ("DENSITY LEVEL" parameter)
1
Display the "FAX TX OPERATION" menu.
–
Refer to "Displaying the "FAX TX OPERATION" menu" on
page 6-68.
2
Press the [+] or [,] key until "DENSITY LEVEL" is selected, and then
press the [OK] key.
3
Press the [*] or [)] key until the desired density level is selected, and
then press the [OK] key.
The "FAX TX OPERATION" menu appears again.
FK-506
UTILITY MODE
FAX TX OPERATION
FAX RX OPERATION
REPORTING
FAX TX OPERATION
DENSITY LEVEL
QUALITY PRIORITY
DEFAULT TX
DENSITY LEVEL
OK
6
6-69