Manual Dialing - Develop FK-506 User Manual

Faxing

Manual dialing

1
Press the [Fax] key to enter Fax mode.
2
Position the document to be faxed.
– Refer to "Positioning the document" on page 3-6.
3
If necessary, select the Quality setting.
– For details on selecting the Quality setting, refer to "Selecting the
fax quality" on page 3-10.
4
Using the keypad, type in the fax number of the recipient.
– F-codes (SUB and SID) can also be entered. Refer to "Using F-
codes" on page 4-3.
5
Press the [Start] key.
Scanning and transmission begin.
!
Detail
A maximum of 30 digits can be entered for the fax number.
Characters that can be entered: Numbers (0 through 9), , #, spaces, and
pauses
For details on entering text, refer to "Entering text" on page 2-12.
If the [Redial/Pause] key is pressed while entering the fax number, a 3-
second pause is added. A pause appears as "P" in the display.
If the machine is connected to a PBX line and the outside line access
number has been specified as described in "Selecting the telephone
wiring system ("PSTN/PBX" parameter)" on page 2-31, enter "#" to dial
the outside line access number automatically.
FK-506
QUALITY:STD/TEXT
01234_
OTHER SETTING=
Memory:100%
3
3-13