Specifying Remote Monitoring ("Remote Monitor" Parameter) - Develop FK-506 User Manual

Utility mode/Fax mode parameters

Specifying remote monitoring ("REMOTE MONITOR" parameter)

1
Display the "ADMIN. MANAGEMENT" menu.
– Refer to "Displaying the "ADMIN. MANAGEMENT" menu" on
page 6-13.
2
Press the [+] or [,] key until "REMOTE MONITOR" is selected, and
then press the [OK] key.
3
Press the [+] or [,] key until "OFF", "LIMITED" or "FULL" is selected,
and then press the [OK] key.
FK-506
UTILITY MODE
USER MANAGEMENT
ADMIN. MANAGEMENT
COPY SETTING 1
ADMIN. MANAGEMENT
REMOTE MONITOR
COMM.SETTING
USER SETTING
REMOTE MONITOR
OFF
LIMITED
FULL
6
6-15