Changing The Scanning Threshold ("Scan Threshold" Parameter) - Develop FK-506 User Manual

6

Changing the scanning threshold ("SCAN THRESHOLD" parameter)

1
Select the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 6-7.
2
Press the [+] or [,] key until "SCAN THRESHOLD" is selected, and
then press the [OK] key.
3
Press the [+] or [,] key until the desired threshold is selected, and then
press the [OK] key.
The "MACHINE SETTING" menu appears again.
6-10
UTILITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
MACHINE SETTING
BUZZER VOLUME
INITIAL MODE
SCAN THRESHOLD
SCAN THRESHOLD
256 Kbyte
512 Kbyte
1024KByte
Utility mode/Fax mode parameters
FK-506