4
–
If a polling ID is not to be specified, continue with step 8.
–
The polling ID can be set to any number between 0000 and 9999.
–
If there is only one polling transmission document to be registered,
it is not necessary to specify a polling ID and password.
–
To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
–
If no password is to be specified, press the [OK] key, and then
continue with step 8.
7
Use the keypad to type in the password (four digits), and then press the
[OK] key.
–
The password can be set to any number between 0000 and 9999.
–
To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
8
Press the [Start] key.
–
If a document for polling is in a mailbox, "
screen.
Scanning begins, and then the machine enters a standby mode.
To stop scanning and registering the document, press the [Clear/Stop]
key, and then select "YES" in the screen that appeared.
!
Detail
To cancel polling transmission, press the [Function] key, and then select
"CANCEL RESERV." to delete the job. For details, refer to "Canceling
(deleting) a queued transmission" on page 3-35.
4-16
Useful transmission and reception functions
POLL ID
:0000
PASSWORD
:0000
" appears in the main
FK-506