3
One-touch dialing
If one-touch dial keys have already been programmed with fax numbers, the
fax number of a recipient can be specified simply by pressing the
corresponding one-touch dial key.
Note
For details on programming a one-touch dial key, refer to "Registering
one-touch dial destinations" on page 6-21.
1
Position the document to be faxed.
–
Refer to "Positioning the document" on page 3-6.
2
If necessary, select the Quality setting.
–
For details on selecting the Quality setting, refer to "Selecting the
fax quality" on page 3-10.
3
Press the one-touch dial key ([01] through [32]) programmed with the
destination where the fax is to be sent.
–
When the switching plate is closed in the lower position, the keys
are numbered 01 through 16.
3-14
Faxing
FK-506