Registering Multiple Destinations As A Group (Create Group); Create Group - Develop ineo+ 224 Instructions For Use Manual

4
4.2

Registering multiple destinations as a group (Create Group)

Create Group

Register multiple destinations as a group. Create Group is a convenient way to broadcast a fax.
Up to 100 groups can be registered for Group.
Related setting (for the administrator)
- You can specify whether to allow the user to register or change destinations (default: [Allow]). For de-
tails, refer to page 7-8.
Registering a group
0 To register a group, you must register the one-touch destinations to be added to the group in advance.
1
Tap [Utility] - [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Group] - [New].
% The administrator can perform the same actions by selecting [Administrator Settings] - [One-
Touch/User Box Registration].
2
Enter destination information, then tap [OK].
% For details on registration information, refer to page 6-7.
Tips
- To check the settings for a registered group, select its registered name, then tap [Check Job Set.].
- To change the settings for a registered group, select its registered name, then tap [Edit].
- To delete a registered group, select its registered name, then tap [Delete].
4-6
Registering multiple destinations as a group (Create Group) 4.2
ineo+ 224/284/364/454/554