6
Selecting header printing ("HEADER" parameter)
1
Display the "FAX TX OPERATION" menu.
–
Refer to "Displaying the "FAX TX OPERATION" menu" on
page 6-68.
2
Press the [+] or [,] key until "HEADER" is selected, and then press the
[OK] key.
3
Press the [+] or [,] key until "OFF" or "ON" is selected, and then press
the [OK] key.
The "FAX TX OPERATION" menu appears again.
6-72
UTILITY MODE
FAX TX OPERATION
FAX RX OPERATION
REPORTING
FAX TX OPERATION
HEADER
RETURN
HEADER
OFF
ON
Utility mode/Fax mode parameters
FK-506