Table of Contents
Advertisement
Utility mode/Fax mode parameters
–
When the switching plate is open in the upper position, the keys are
numbered 17 through 32.
4
Press the [+] or [,] key until "EDIT" or "DELETE" is selected, and then
press the [OK] key.
–
If "EDIT" was selected, continue with the next step.
–
If "DELETE" was selected, the registered program settings are
deleted and the "DIAL REGISTRATION" menu appears again.
5
Use the keypad to type in the transmission time, and then press the
[OK] key.
6
If necessary, change the recipient settings, and then press the [OK]
key.
The settings are registered, and the "DIAL REGISTRATION" menu
appears again.
FK-506
PROGRAM DIAL 32
EDIT
DELETE
RETURN
TIMER TX
TIMER
18:00
6
6-45
Advertisement
Table of Contents
