Using F-Codes - Develop FK-506 User Manual

Useful transmission and reception functions
4 Useful transmission and reception
functions
4.1

Using F-codes

This machine is compatible with F-code communications defined by the
Communications and Information Network Association of Japan.
F-code communications are mailbox functions that use "SUB" (sub-
addresses), "SEP" (selective polling), "SID" and "PWD" (passwords), which
are regulated by the G3 standards of the ITU-T (International
Telecommunication Union).
Use the keypad to specify the F-codes described below, according to the
operation to be performed.
F-code
SUB
PASSWORD (SID)
POLL ID (SEP)
!
Detail
F-code functions can only be used with fax machines equipped with
F-code functions. Before specifying settings, check that both machines
are compatible with F-codes.
If one-touch dial keys or speed dial numbers are programmed with
F-codes (SUB or SID), F-code communications can be performed.
Mailbox transmissions/receptions can be performed with machines
compatible with F-codes.
FK-506
Description
Specify when transmitting using F-codes. A
maximum of 20 digits can be entered.
Specify when limiting recipients by using a
password. A maximum of 20 digits can be en-
tered.
Specify when calling the sender to have a doc-
ument sent.
4
4-3