Registering Speed Dial Destinations - Develop FK-506 User Manual

Utility mode/Fax mode parameters

Registering speed dial destinations

If speed dial numbers are programmed with fax numbers, the recipient can
be specified easily and accurately without the need to manually enter the
number using the keypad.
A maximum of 240 speed dial numbers (001 through 240) can be
programmed with destinations.
Note
If optional image controller IC-206 or network interface card NC-503 is
installed, an e-mail address can be entered as the destination.
1
Display the "DIAL REGISTRATION" menu.
– Refer to "Displaying the "DIAL REGISTRATION" menu" on
page 6-20.
2
Press the [+] or [,] key until "SPEED DIAL" is selected, and then press
the [OK] key.
FK-506
UTILITY MODE
COPY SETTING 2
DIAL REGISTRATION
FAX REGISTRATION
DIAL REGISTRATION
ONE-TOUCH DIAL
SPEED DIAL
GROUP DIAL
6
6-27