Develop FK-506 User Manual page 152

4
In order to perform a direct fax transmission, settings must be specified for
the following in the "NETWORK SETTING" menu (which can be displayed
after selecting "ADMIN. MANAGEMENT" in the "UTILITY" menu).
!
Detail
For details on the network settings, refer to the user manual for image
controller IC-206 or network interface card NC-503.
Parameters that must be specified for direct faxing
Parameter
IP ADDRESS SETTING
SUBNET MASK
GATEWAY
GATEWAY TX
4-30
Useful transmission and reception functions
Description
Specify the network settings for this machine.
To allow use of the direct fax transmission
function, select "ENABLE". To prohibit use of
the direct fax transmission function, select
"DISABLE".
FK-506