Changing The Initial Mode ("Initial Mode" Parameter) - Develop FK-506 User Manual

Utility mode/Fax mode parameters

Changing the initial mode ("INITIAL MODE" parameter)

1
Select the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 6-7.
2
Press the [+] or [,] key until "INITIAL MODE" is selected, and then
press the [OK] key.
3
Press the [+] or [,] key until "COPY" or "FAX" is selected, and then
press the [OK] key.
The "MACHINE SETTING" menu appears again.
FK-506
UTILITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
MACHINE SETTING
BUZZER VOLUME
INITIAL MODE
SCAN THRESHOLD
INITIAL MODE
COPY
FAX
6
6-9