System Diagram; Rear Panel - Eneo PNR-5216 Quick Reference Manual

Quick Reference Guide
NOTES:
 This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/).
 The software included in this product contains some Open Sources. You may obtain the complete
corresponding source code from us. See the Open Source Guide on the software CD (OpenSourceGuide\
OpenSourceGuide.pdf) or as a printed document included along with the User's Manual.

1.2 System Diagram

1.3 Rear Panel

① Power In: Connect a power cord.
② USB Port: Connect USB devices.
③ DVI: Connect a PC monitor. Connect a monitor before turning on the system. Video might not be
displayed on the monitor when connecting a monitor after turning on the system.
④ D-Sub: Connect a PC monitor. Connect a monitor before turning on the system. Video might not be
displayed on the monitor when connecting a monitor after turning on the system.
⑤ Network (RJ-45): Connect a Cat5 cable with an RJ-45 jack. Refer to 2.2 System Setting (p. 10) for
details about network setting.
⑥ Audio In (mic): Connect a microphone. This is for two-way audio communication.
⑦ Audio Out (Line out): Connect a speaker.
⑧ Audio In (Line in): Connect a line-in device. This is for two-way audio communication.
2