Configuring Osd Settings - Eneo FNR-4004/500 User Manual

Configuring OSD Settings
On Screen Display (OSD) settings can be configured in the OSD Configuration menu. The OSD is shown in each
display in Live Feed and Playback mode.
To configure OSD settings:
1. Enter the OSD Configuration menu, shown in Figure 50 by going to Main Menu > Cameras Setup > OSD
Configuration.
2. Select the camera to setup OSD configuration in using the camera drop down menu on the upper left of the
menu. If all cameras are to be configured with the same settings, select All Cameras from the list.
3. Configure OSD settings, including:
• Camera Name: Name of selected camera.
• Display Camera Name: Enable to display camera name in OSD.
• Display Date: Enable to display date in OSD.
• Display Week: Enable to display week in OSD.
• Date Format: Format of date.
• Time Format: Format of time.
• OSD Display: Display style for OSD.
4. Using the mouse, click and drag OSD elements on preview screen to desired location.
5. Select the Save button to save OSD settings and select Exit to return to the previous menu. Selecting the Exit
button without clicking Save will quit out of the menu without saving settings.
Figure 50. OSD Configuration Menu
55