XDSL COMMANDS
xdsl config
Modify/Display dsl configuration
SYNTAX:
xdsl config
where:
adslmultimode
detect-lop
syslog
status
856
[adslmultimode = <{disable|adsl|adsl2|
adsl2plus}>]
[detect-lop = <{disabled|enabled}>]
[syslog = <{disabled|enabled}>]
[status = <{down|up}>]
Set/Show selected multimode type of the modem
Detect Loss Of Power
Log in syslog during showtime
configure adsl line up or down (setting can't be saved!)
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL