atm cac config
Configure ATM connection admission control.
SYNTAX:
atm cac config
where:
port
state
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
state = <{disabled|enabled}>
The port for which CAC is configured.
Enable/disable CAC for an ATM port.
ATM COMMANDS
REQUIRED
REQUIRED
23