Firewall Rule Debug Clear - Technicolor TG582n Cli Reference Manual

firewall rule debug clear

Clear rule statistics.
SYNTAX:
firewall rule debug clear
where:
chain
index
Show the current routes in the grp
routing table.
SYNTAX:
firewall rule debug clear
where:
dst
dstmsk
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
[chain = <chain name>]
[index = <number>]
Show the current routes in the grp routing
table. = <number>
The name of the chain.
The index of the rule in the chain.Command: grp rtlist
Syntax : rtlist [dst = <ip-address>] [dstmsk = <ip-mask(dotted
or cidr)>]
[dst = <ip-address>]
[dstmsk = <ip-mask(dotted or cidr)>]
The destination IP address using this route. Supports ip/
mask notation.
The destination IP address mask.
FIREWALL COMMANDS
OPTIONAL
OPTIONAL
REQUIRED
OPTIONAL
OPTIONAL
451