Mbus Listobjects - Technicolor TG582n Cli Reference Manual

MBUS COMMANDS

mbus listobjects

Display the object instances
SYNTAX:
mbus listobjects
where:
dmtree
path
type
output
showflags
602
[dmtree = <{igd|atomic|system}>]
[path = <quoted string>]
[type = <{indexpath|keystrpath}>]
[output = <{tree|list}>]
[showflags = <{disabled|enabled}>]
Select mbusd datamodel tree.
Fully qualified mbus path to list.
Path type (default = indexpath)
List output type
Display object flags (Clean or Dirty / Persistent or Volatile)
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL