Grp Rip Ifconfig - Technicolor TG582n Cli Reference Manual

GRP COMMANDS

grp rip ifconfig

Configure a RIP interface.
SYNTAX:
grp rip ifconfig
where:
intf
rip
rxversion
authmode
authstr
splithorizon
464
intf = <{LocalNetwork|Internet}>
[rip = <{disabled|enabled}>]
[rxversion = <{rip_unspec|rip_v1|rip_v2|
rip_v1-2}>]
[authmode = <{none|cleartext}>]
[authstr = <password>]
[splithorizon = <{disabled|enabled}>]
The name of the RIP interface to configure.
Enable/Disable the RIP status.
Set the RIP receive version.
Set the RIP authentication mode.
Set the RIP authentication password.
Enable/Disable the split horizon status.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL